Wheel Spacer Test Fit Kit 5x100 / 5x112

Wheel Spacer Test Fit Kit – PETG-CF

Find the perfect wheel fitment before committing to permanent spacers.

This test fit kit is designed specifically for trial fitting wheels and allows you to quickly check different spacer thicknesses and determine the ideal fitment for your setup.

The spacers are 3D printed from PETG-CF (carbon-fiber-reinforced PETG) and are intended exclusively as temporary test-fit tools.

Kit Contents

• 2 × 10 mm spacers

• 2 × 5 mm spacers

• Available bolt patterns:

  • 5×100

  • 5×112

By combining the different spacer thicknesses, you can test various wheel positions and visually determine the fitment you prefer before purchasing or installing proper road-approved wheel spacers.

IMPORTANT – TEST FIT ONLY

These parts are NOT designed for road use, driving, or carrying vehicle loads.

They are intended solely for static wheel test fitting to check clearance, wheel position, and overall fitment.

• Do not drive the vehicle with these spacers installed.

• Do not use them on public roads or for any vehicle operation.

• Do not use them as a substitute for properly manufactured, vehicle-approved wheel spacers.

• The parts are not load-bearing components and must only be used for temporary test fitting while the vehicle is stationary.

Use at your own risk. Always remove the test-fit spacers before driving the vehicle.

This product is a fitment testing aid only and is not intended to be used as a safety-critical automotive component.